Selasa, 26 Januari, 2021 | 700 dibaca | 0 dikomentari | 0 dibagi

Saipem

Saipem is a leading company in engineering, drilling and construction of major projects in the energy and infrastructure sectors. It is "One-Company" organized in five business divisions (Offshore E&C, Onshore E&C, Offshore Drilling, Onshore Drilling and XSight, dedicated to conceptual design).

Saipem is a global solution provider with distinctive skills and competences and high-tech assets, which it uses to identify solutions aimed at satisfying customer requirements. Listed on the Milan Stock Exchange, it is present in over 60 countries worldwide and has 32 thousand employees of 120 different nationalities.

We are seeking for best candidates to fill the vacant position:

 

1. POSITION  : Piping Layout Engineer (4 Position)

Department/Project : Offshore Engineering (Piping)

Education  : University Graduate on Technical Major

Seniority  : Expert Engineer

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (6 months-possibility to extend)

Work location  : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Diploma or equivalent technical vocational degree in appropriate engineering subject
2. Knowledge of Piping and Layout engineering design criteria, methods, and workflows from conceptual phase up to site engineering phase.
3. Knowledge of main international Discipline standards, codes, and regulations.
4. Capability to define the technical documents set based on Project quantities and scope of work.
5. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors.
6. Knowledge of tools related to 2D and 3D modelling activities specifically AutoCAD and S3D experienced users.
7. Capability to design and coordinate P&IDs for related systems. Full knowledge of Piping - Process engineering workflow and of P&ID mechanization procedures and criteria.
8. Full knowledge of P&IDs mechanization battery limits.
9. Knowledge of basic principles of stress analysis design criteria regarding typical load conditions, stress calculations, comparison criteria with admissible values, Capability to perform calculation relevant to expansion/stress analysis in order to allow flexibility and piping support location.
10. Basic knowledge and capability to develop plant layout and equipment layout according to process requirements defined on PFD or P&ID and in accordance to the engineering good practices: developing the single line structure to lay the piping distribution and the equipment elevation. Knowledge of plant layout optimization
11. Knowledge of Piping/Electrical/Instrumental/structural basic terminology and rules.
12. Specific knowledge of drafting drawing techniques.
13. Support the organization's mission with own behavior and act to promote the organization's goals and reputation.
14. Communicate in a simple, clear and assertive way. Adapt own approach to different audiences to have a positive impact and to gain support for own plans.
15. Be consistent with what he/she says, and with personal and organizational values. Act with integrity even though this implies making difficult decisions.
16. Collaborate with peers or teams of different functions and countries to achieve success collectively. Share useful information and build trust by listening to all stakeholders. Be interested in other individuals' perspectives and concerns.
17. Search for opportunities to increase and improve own know-how and competencies. Encourage others to increase their know-how. Curiosity and an orientation for learning are implied.

BRIEF JOB DESCRIPTIONS

1. Knowledge of Piping/Electrical/Instrumental/structural basic terminology and rules.
2. Specific knowledge of drafting drawing techniques.
3. Support the organization's mission with own behavior and act to promote the organization's goals and reputation.
4. Communicate in a simple, clear and assertive way. Adapt own approach to different audiences to have a positive impact and to gain support for own plans.
5. Be consistent with what he/she says, and with personal and organizational values. Act with integrity even though this implies making difficult decisions.
6. Collaborate with peers or teams of different functions and countries to achieve success collectively. Share useful information and build trust by listening to all stakeholders. Be interested in other individuals' perspectives and concerns.
7. Search for opportunities to increase and improve own know-how and competencies. Encourage others to increase their know-how. Curiosity and an orientation for learning are implied.

 

2. POSITION  : Sr. Piping Layout Engineer (4 Position)

Department/Project : Offshore Engineering (Piping)

Education  : University Graduate on Technical Major

Seniority  : Expert Engineer

Working Experiences : More than 10 years in similar position or similar field

Working Status  : Temporary / Contract (12 months-possibility to extend)

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Diploma or equivalent technical vocational degree in appropriate engineering subject
2. Knowledge of Piping and Layout engineering design criteria, methods, and workflows from conceptual phase up to site engineering phase.
3. Knowledge of main international Discipline standards, codes, and regulations.
4. Capability to analyze dedicated Project requirements in terms of local standards and codes and to identify proper implementation actions.
5. Ability to manage the resolution of Engineering Non-Conformity (NCR) at site supporting Construction and / or Fabrication activities effectively interfacing project Team, Client and Vendor.
6. Capability to define the technical documents set based on Project quantities and scope of work.
7. Capability to monitor the relevant activity progress and the actual manhours spent vs the earned progress.
8. Contribute to Project reporting for the relevant engineering part
9. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors.
10. Knowledge of tools related to 2D and 3D modelling activities specifically AutoCAD and S3D experienced users.
11. Capability to design and coordinate P&IDs for related systems. Full knowledge of Piping - Process engineering workflow and of P&ID mechanization procedures and criteria.
12. Full knowledge of P&IDs mechanization battery limits.
13. Knowledge of basic principles of stress analysis design criteria regarding typical load conditions, stress calculations, comparison criteria with admissible values, Capability to perform calculation relevant to expansion/stress analysis in order to allow flexibility and piping support location.
14. Basic knowledge and capability to develop plant layout and equipment layout according to process requirements defined on PFD or P&ID and in accordance to the engineering good practices: developing the single line structure to lay the piping distribution and the equipment elevation. Knowledge of plant layout optimization.
15. Knowledge of Piping/Electrical/Instrumental/structural basic terminology and rules.
16. Specific knowledge of drafting drawing techniques.
17. Support the organization's mission with own behavior and act to promote the organization's goals and reputation.
18. Communicate in a simple, clear and assertive way. Adapt own approach to different audiences to have a positive impact and to gain support for own plans.
19. Be consistent with what he/she says, and with personal and organizational values. Act with integrity even though this implies making difficult decisions.
20. Collaborate with peers or teams of different functions and countries to achieve success collectively. Share useful information and build trust by listening to all stakeholders. Be interested in other individuals' perspectives and concerns.
21. Search for opportunities to increase and improve own know-how and competencies. Encourage others to increase their know-how. Curiosity and an orientation for learning are implied.

BRIEF JOB DESCRIPTIONS

1. Design, execute or check the typical Piping and Layout studies including:
   1. 3D Modelling using SmartPlant®3D / S3D
   2. 3D Model review with other disciplines and issue of clash check report
   3. Construction or design drawings using 2D software or extracted from 3D for piping networks (overall plot plan, equipment layout drawings, piping general arrangement, piping isometrics and piping supports)
   4. Bill of materials or material take off
   5. Extraction of bill of materials and other information from the 3D CAD model
2. Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations.
3. Analyze technical documents (e.g. specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks.
4. Seek solutions which can bring overall savings to the project.
5. Co-ordinate the work of his team with the Piping and Layout engineers of the project
6. Check the input data and all the documents and information issued by project
7. Check permanently that all the assumptions upon which his teamwork is based keep up with the project development and warn the project Piping and Layout Lead of any detected anomaly
8. Documents updating after comments issued by other disciplines (inter-discipline checks) or external stakeholders (Client, Yards, Third party review, etc.)
9. Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project
10. Support design
11. Engineering support during construction phase

 

3. POSITION  : Lospe Engineer / Technical Safety Junior/Expert Engineer (3 Position)

Department/Project : Offshore Engineering (LOSPE)/NFPS EPCO Project

Education  : University Graduate on Technical Major

Seniority  : Junior/Expert Engineer

Working Experiences : Min. 3 years in similar position or similar field

Working Status  : Temporary / Contract (12 months)

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Personal skills
   1. For junior engineer, fresh graduate in Chemical Engineering or has one year experience in LOSPE / Technical Safety group, and has an interest in LOSPE / Technical Safety project activities,
   2. For expert engineer, has experience on development of LOSPE /Technical Safety document and activities both for project bid and project execution with major international Oil&Gas Companies.
2. Technical & professional skill/knowledge (for expert engineer)
   1. Has capability to develop some of the following technical documents and activities under LOSPE / Technical Safety based on project scope:
      1. Risk assessment and safety studies e.g. QRA, FERA, EERA, ESSA, DOS, NHRA, RAM study, participation on HAZID/HAZOP/SIL/3D model review workshops,
      2. Firefighting system including active and passive fire protection philosophy, FW system PID design, FW and foam system hydraulic calculation, specification and data sheet for firefighting equipment and firefighting equipment layout,
      3. General safety design e.g. HAC, F&G detector system (F&G detector philosophy, F&G layout, F&G detector mapping, F&G cause and effect matrix, SIL verification), safety equipment specification/data sheet and layout, gas dispersion and heat radiation study,
      4. Environmental engineering e.g. environmental regulation, noise & vibration study, release register.

BRIEF JOB DESCRIPTIONS

• Prepare technical document and activities under LOSPE/Technical Safety based on project scope including calculation, specification and drawing,
• Support procurement, commissioning, construction departments and yard activities,
• Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad

 

4. POSITION  : Lospe Engineer / Technical Safety Senior/Lead Engineer (2 Position)

Department/Project : Offshore Engineering (LOSPE)/NFPS EPCO Project

Education  : University Graduate on Technical Major

Seniority  : Senior/Lead Engineer

Working Experiences : More than 10 years in similar position or similar field

Working Status  : Temporary / Contract (12 months)

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Personal skills
   1. Has experiences on development of LOSPE /Technical Safety document and activities both for project bid and project execution with major international Oil&Gas Companies,
   2. Has experiences in engineering management and manage an internal group of engineers,
   3. Has experiences in interfacing with others discipline, project management, vendors and client.
2. Technical & professional skill/knowledge
   1. Strong knowledge about LOSPE / Technical Safety regulations, codes & standards,
   2. Expertise in the various LOSPE / Technical Safety activities: 
      1. Risk assessment and safety studies e.g. QRA, FERA, EERA, ESSA, DOS, NHRA, RAM study, participation on HAZID/HAZOP/SIL/3D model review workshops,
      2. Firefighting system including active and passive fire protection philosophy, FW system PID design, FW and foam system hydraulic calculation, specification and data sheet for firefighting equipment and firefighting equipment layout
      3. General safety design e.g. HAC, F&G detector system (F&G detector philosophy, F&G layout, F&G detector mapping, F&G cause and effect matrix, SIL verification), safety equipment, specification/data sheet and layout, gas dispersion and heat radiation study,
      4. Environmental engineering e.g. environmental regulation, noise & vibration study, release register

BRIEF JOB DESCRIPTIONS

• Lead/coordinate LOSPE / Technical Safety internal group of the following LOSPE / Technical Safety activities; risk assessment & safety studies, firefighting system, general safety, and environmental engineering,
• Review and/or prepare all document related to point no. #1 including philosophy, calculation, specification and drawing before issue to client, and review document from other disciplines,
• Back to back with LOSPE / Technical Safety lead engineer in the meetings and technical reviews,
• Support procurement, commissioning, construction departments and yard activities,
• Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad

 

5. POSITION  : Lospe Engineer / Technical Safety Senior Designer / Drafter (2 Position)

Department/Project : Offshore Engineering (LOSPE)/NFPS EPCO Project

Education  : Min. High school / diploma

Seniority  : Senior Designer / Drafter

Working Experiences : More than 5 years in similar position or similar field

Working Status  : Temporary / Contract (12 months)

Work location   : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Personal skills

• Has experiences on drafting all LOSPE / Technical Safety drawing; FW system PIDs; HAC layout; Safety, firefighting equipment, and escape route layout; PFP layout; F&G detector layout

2. Technical & professional skill/knowledge

• Strong knowledge and operate following software CAD, SPPID, SP3D, PDMS.

BRIEF JOB DESCRIPTIONS

• Draw all LOSPE / Technical Safety drawing,
• Support engineer to develop drawing for report, and 3D model layout review for LOSPE equipment,
• Can be mobilized on the project locations including offshore, other Saipem offices both in Indonesia and/or abroad

 

6. POSITION  : ELECTRICAL ENGINEER

Department/Project : Onshore Engineering (ELE)/TEP ONSHORE Project

Education  : University Graduate on Technical Major

Seniority  : Expert Engineer

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (6 months)

Work location  : Jakarta / Papua

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Knowledge of Engineering standard, codes and regulations
2. Capability to perform Electrical Systems calculation and studies.
3. Capability to design electrical systems (power generation and distribution, grounding, lighting, etc.)
4. Knowledge of Discipline engineering design criteria, method and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. 
5. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors Engineering design and document review.
6. Capability to perform technical evaluation of vendor bids with reference to Discipline items, bulk materials, and subcontracted work packages, according to Corporate standards and procedure.
7. Having experience in construction activities

BRIEF JOB DESCRIPTIONS

• Electrical Engineer

 

7. POSITION  : ELECTRICAL FIELD ENGINEER

Department/Project : Onshore Engineering (ELE)/TEP ONSHORE Project

Education  : University Graduate on Technical Major

Seniority  : Expert Engineer

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (3 months)

Work location  : Jakarta / Papua

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Knowledge of Electrical system design, configuration, code and standard, calculations.
2. Knowledge of Electrical equipment and bulk materials
3. Knowledge of Electrical system - mechanical completion.

BRIEF JOB DESCRIPTIONS

• TAG VALIDATION - Screening and Check Sheets in WINPCS.

 

8. POSITION  : INSTRUMENT ENGINEER -INSTRUMENT SUPERINTENDENT (THREE POSITION) 

Department/Project : Onshore Engineering (INS)/TEP ONSHORE Project

Education  : University Graduate on Technical Major

Seniority  : Expert Engineer

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (3 months)

Work location  : Jakarta / Papua

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Familiar with Instrument Engineer & Installation
2. Familiar with Microsoft & work at site

BRIEF JOB DESCRIPTIONS

• Will organize with System SPAs to deliver system handover for all systems.
• Follow up punch list for each system, and coordinate with SPA for punch closing
• Follow up FDC/NPIC with Engineering with SPAs for each system .
• Follow up materials with Engineering which are need for punch closing
• To be a bridge between SPA and SH team
• Attend SH Meetings
• Must have knowledge about instrument and control system
• Must be proactive and good relationship with people
• Must speak English at least instrument/Electrical/Mechanical terms.
• It is preferable to be an instrument commissioning experienced person.

 

9. POSITION  : INSTRUMENT ENGINEER -ANALYSER SUPERINTENDENT (Three position)

Department/Project : Onshore Engineering (INS)/TEP ONSHORE Project

Education  : University Graduate on Technical Major

Seniority  : Expert Engineer

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (3 months)

Work location  : Papua

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Familiar with Instrument Engineer & Installation
2. Familiar with Microsoft & work at site

BRIEF JOB DESCRIPTIONS

• He/She must have knowledge about liquid analyzers. (PH, Silica, Conductivity, Turbidity)
• He/She must have knowledge about GC(Gas chromatography) analyzers.(To check Compositions of the gas)
• He/She must have knowledge about CO2 and Moisture analysers.
• Must have knowledge about Instruments and Analysers
• Must be proactive and good relationship with people.
• Must speak English at least instrumentation/Electrical/Mechanical terms.
• It is preferable to be an instrument commissioning experienced person.

 

10. POSITION  : EMERGENCY RESPONSE TEAM LEAD (Working at Height)

Department/Project : HSE / TEP ONSHORE Project

Education  : DIPLOMA / University Graduate on Technical Major

Seniority  : Expert

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (12 months)

Work location  : Papua

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. IRATA Level 3 - Rope Access Technician Training (Preferably)
2. Having licensed as Teknisi Akses Tali Tingkat 3 (as per Ministry of Manpower requirement)
3. Vertical rescue/rescue at height Training
4. First Aid Training
5. Minimum 5 years' experience in rope access & Emergency Response.

BRIEF JOB DESCRIPTIONS

• Lead the ERT Working at Height

 

11. POSITION  : HSE COORDINATOR

Department/Project : HSE / TEP ONSHORE Project

Education  : University Graduate on Technical Major

Seniority  : Expert

Working Experiences : More than 10 years in similar position or similar field

Working Status : Temporary / Contract (3-6 months)

Work location  : Ambon / Papua

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Candidate should have experience in Oil & Gas
2. Candidate should have experience in troubleshooting instrument

BRIEF JOB DESCRIPTIONS

• Willing to be assigned in the Quarantine Area
• Assist the Project engineering and management teams in the Risk Management Process (i.e. HAZOP, HAZID, Hazard and Effect Management Process, Risk Assessment, etc.)
• Plan, define and supervise safety procedures at project and construction level
• Update and spread safety rules, both at the organizational and employees' level
• Conduct internal safety audits
• Ensure the knowledge of authorization regulations and process for the safety of plants and sites is update and disseminated
• Participated in pre-construction survey, identify safety criticalities and design mitigation measures
• Take part in accident / incident investigation
• Participate in HSE Risk Management and Occupational Safety Risk Assessment.

 

12. POSITION  : TELECOM ENGINEER

Department/Project : Offshore Engineering (INS)/NFPS EPCO Project

Education  : University Graduate on Technical Major

Seniority  : Expert Engineer

Working Experiences : More than 8 years in similar position or similar field

Working Status : Temporary / Contract (12 months)

Work location  : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Familiar to Telecom Engineering as Engineer
2. Work Experience  in Oil and Gas Engineering Company
3. Work Experience with PAGA, CCTV, RADIO COMM DATA, FO, etc. Telecom Specification, Coverage study vendor follow-up, Automation interface, involve in SP3D review, etc.
4. Able to work under supervise and instruction from PSL/HOD and work with other discipline as team.

BRIEF JOB DESCRIPTIONS

• Instrument /Automation/Telecom Engineering will be done at Alamanda Office, Jakarta.

 

13. POSITION  : INSTRUMENT DESIGNER

Department/Project : Offshore Engineering (INS)/NFPS EPCO Project

Education  : Min. High school / diploma

Seniority  : Senior Designer / Drafter

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (12 months)

Work location  : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Familiar to Instrument/Automation Engineering as Designer
2. Work Experience  in Oil and Gas Engineering Company
3. Work Experience with Instrument/Automation Drawing, MTO, SPI Wiring, SPI Hook-up, SPI Installation Detail, SP3D Model, Involved in the 3D review, etc. 
4. Able to work under supervise and instruction from PSL/HOD and work with other discipline as team.

BRIEF JOB DESCRIPTIONS

• The NFPS Instrument /Automation/Telecom Engineering will be done at Alamanda Office, Jakarta.

 

14. POSITION  : TELECOM DESIGNER

Department/Project : Offshore Engineering (INS)/NFPS EPCO Project

Education  : Min. High school / diploma

Seniority  : Senior Designer / Drafter

Working Experiences : More than 5 years in similar position or similar field

Working Status : Temporary / Contract (12 months)

Work location  : Jakarta

REQUIRED WORKING SKILLS/QUALIFICATION/SERTIFICATION

1. Familiar to Telecom Engineering as Designer
2. Work Experience  in Oil and Gas Engineering Company
3. Work Experience with Telecom Drawing, MTO, SP3D Model, Involved in the 3D review, etc.
4. Able to work under supervise and instruction from PSL/HOD and work with other discipline as team.

BRIEF JOB DESCRIPTIONS

• Instrument /Automation/Telecom Engineering will be done at Alamanda Office, Jakarta.

Please send your qualified CV and related Certificate to: recruitment@saipem.com

 

"Saipem and its subsidiaries recruit their #humanresources through specific procedures, selecting and #hiringcandidates, adopting criteria of merit, ability and professionalism in all #recruitment decisions and will never request payment of any kind. If you want to search #jobopportunities in Saipem. Please refer to the "careers" area of the Saipem website of the official Saipem LinkedIn page and be careful about any other kind of unofficial requests."

• Di iklankan: 2021-01-26 18:50:52 - Standar Waktu Asia Tenggara
• Berakhir: 2021-02-09 23:59:59 - Standar Waktu Asia Tenggara