Kamis, 26 Juni, 2014 | 574 dibaca | 0 dikomentari | 0 dibagi

PT SUPRACO INDONESIA

PT. SUPRACO INDONESIA

Jakarta based company with more than 33 years of experience in providing services to oil and gas industry and Geothermal in Indonesia. We are seeking for best candidates to fill the vacant position for our projects

 

E&I Construction Tech Foreman – Field Facilities (CP-A421)

RESPONSIBILITY AND DUTIES:

• monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Support Construction Site Manager in monitoring and appraising the contractors performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
• Verify physical progress
• Monitor mechanical acceptance and start-up activities between operating unit and contractor
• Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
• Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
• Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
• Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
• Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
• Witness installation of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Monitor loop checks and review records for the same in accordance with technical requirements
• Monitor construction and installation and testing of instrument tubing works
• Review Contractors field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
• Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Minimum ten (10) years experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
• Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Well versed in safe work practices
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
• Placement : Cepu Site

 

STRUCTURAL INSPECTOR – FIELD FACILITIES (CP-A422)

Responsibility and duties:

• Oversee inspection of steel structural pre-fabrication and installation activities conducted at contractors / sub-contractors facilities and at site
• Assist in structural material receiving inspections at site and review original material certificates for compliance to codes and specifications where required
• Ensure traceability is maintained for the fabricated part as stated in the project specifications
• Monitor and ensure the inspections are carried out to the required levels as mentioned in the ITPs
• Witness the dimensional control inspections on the pre-fabricated and as well on the installed parts
• Co-ordinate with other disciplines for interface activities, for example civil foundation interface with structural
• Monitor the structural welding activities inclusive of fit up / dimensional control inspections
• Monitor the contractor uses only qualified welders and follows the approved welding procedures
• Witness NDT / review NDT reports as required
• Final inspection, generate punch lists and follow up of the same for close out
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Cepu project Construction Surveillance Program.
• Inspect / assist in monitoring structural painting activities
• Witness bolt torque tightening of structural components
• Monitor quality, issue non-conformance reports when quality deficiencies are noted and set in motion the corrective actions jointly with contractor. Maintain the NCR data base for structural portion.
• Prepare weekly or monthly quality reports to be submitted to Site verification lead.

Required knowledge, qualifications, skills, and experiences:

• S 1 or equivalent with minimum 10 years of experience out of which at least 5 years working in an oil and gas on shore plant construction project as senior structural inspector. Qualifications in welding inspection preferred.
• Familiar with international standards like ASCI, AWS D1.1 etc. and industrial practices on structural fabrication and installation inspection works.
• Knowledgeable on welding, NDT and painting activities and associated inspection.
• Familiar with structural dimensional checking using conventional and digital survey instruments.
• Able to understand and interpret Civil survey reports for co-ordinates / leveling / orientation.
• Understand torque tightening methods and inspection.
• Good interpersonal communication skills with fluency in Bahasa Indonesia and English.
• Computer literate familiar with MS Office suite for preparing official reports.
• Placement : Batam

 

Civil Inspector – Field Facilities (CP-A423)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES

• Minimum fifteen (15) years experience in inspection of Civil QA/QC activities out of which at least 5 years in client position .
• Possess leadership qualities with a good analytical mind to manage the team of contractor QC personnel
• A self starter with proactive approach in foreseeing problems and setting in motion the corrective actions
• S1 graduate or equivalent with a good communication capability in Bahasa Indonesia and English
• Knowledge on International standards like ASCI, AWWA etc., and the material testing methods
• Experienced in witnessing the tests at the laboratories
• Possess experience to conduct regular spot checks / spot audits on the on going civil activities at site and implement corrective actions as required
• Experienced in witnessing the fabrication and installation of civil steel structures
• Experienced in inspection of civil road construction works, culverts, fly over / over pass
• Experienced in civil building inspection works, inclusive of associated architectural / interior decoration works
• Placement : Cepu Site

 

PIPING INSPECTOR (CP-A424)

Responsibility and duties:

• Oversee inspection of piping and welding activities conducted at contractors and sub-contractors facilities.
• Coordinate with other structural and piping inspectors
• Review original material certificates for compliance to codes and specifications
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Ensure storage and use of welding consumables is per manufactures recommendations and full certification
• Review Contractors field inspection and test reports
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Review welder qualifications certifications, and attend welder qualification
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.
• Implement Cepu project Construction Surveillance Program
• Required knowledge, qualifications, skills, and experiences:
• Working Knowledge of:
  • Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
  • Piping fabrication methods
  • Welding processes and NDE techniques including evaluation methods
  • Piping, Isometrics and shop Drawings
• Thorough understanding of applicable Cepu project specifications
• Trained to authorize work permits (e.g. hot work, confined space, etc.)
• Good oral and written English language skills
• Well versed in safe work practices
• Demonstrated ability to communicate in multiple languages
• Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.
• Placement : Batam

 

SHE&S Safety Site for Scaffolding specialist (CP-A425)

RESPONSIBILITY AND DUTIES:

• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Direct supervision of Rigging and Heavy Lifting [ onshore preferable ]
• Conduct regular safety inspections / assessments on-site and at key off-site subcontractor locations in accordance with established project and site safety plans or as requested by site team members
• Identify and work to eliminate hazards, unsafe conditions, and unsafe acts; work with company, contractor, and subcontractor management toward achieving an injury-free work place
• Keep site management apprised of significant safety issues, safety alerts and plans / progress towards resolving issues and eliminating hazards
• Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
• Communicate safety initiatives, achievements, experiences, and issues from other sites and projects with site team members and contractor / subcontractor safety advisors / management
• Participate in investigation and follow-up of incidents / accidents; prepare notifications / reports for communication of significant incidents to company project / functional management per project incident reporting procedures and matrix
• Coach and advise contractor / subcontractor safety professionals / management in incident investigation documentation, reporting, and follow-up, including root cause analysis and case management
• Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
• Prepare / provide a safety induction briefing to new team members and visitors to site
• Collect and share safety lessons learned with other sites and project and functional management

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• College level education or equivalent
• 5+ years as Specialist in Scaffolding Inspection
• 10+ years in Construction Safety-related positions, around 6 years in Onshore
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
• Placement : Cepu Site

 

Machinery Inspector ( CP- A426)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• experience in inspection of machinery (both rotating and static equipments) on major onshore construction projects
• Knowledgeable on international standards like ANSI, API, ASME etc. on equipment instDellation and inspection
• Exposure to fabrication / installation inspection of skid mounted package equipments, stand alone static / rotating equipments like pumps, compressors, diesel generators, vessels etc. in onshore oil and gas projects.
• Experienced in hot and cold alignment works of rotating equipments. Knowledge on use of specialised tools for alignment / levelling purposes.
• Experienced in equipment internal inspection works, hydrotests / leak tests etc.
• Able to read GA drawings and equipment installation drawings. Also read P&ID and isometric drawings for interfacing activities.
• Exposure to safe rigging and lifting practices for safe lifting and installation of equipments / skids. Able to understand and then co-ordinate with HSE / Rigging teams for safe installation practices.
• Working knowledge on painting and insulation works
• Knowledge on bolt torque tightening works
• Exposure to SKPI requirements for equipment installation certification
• Familiar with MIGAS regulations for cranes load testing
• Experienced in shop / field valve testing works as per API, ANSI / ASME persyaratan
• Experienced in witnessing safety relief valve pop–up testing
• Experienced in installation inspection of heat tracing piping / tubing works
• Exposure to work permits system (e.g. hot work, confined space etc.) and implementation of safe work practices
• Placement :Cepu Site

 

NDT Inspector (CP-A427)

RESPONSIBILITY AND DUTIES:

• Witness and oversee daily activities and related inspection activities in piping, structural, mechanical, and E&I disciplines. This includes visual and NDT checks like RT, MT, PT and UT.
• Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out
• Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance
• Witness Nitrogen (N2) leak tests on piping systems
• Witness furnace PWHT and Local PWHT of piping works
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Project Construction Surveillance Program

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Have minimum of 15 years in welding inspection activities working to international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok / NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector qualifications.
• Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiographs to various international standards.
• Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance
• Experienced in Nitrogen leak tests preferred
• Thorough understanding of applicable industry specifications
• Native tongue in Bahasa Indonesia with proficiency in spoken and written English language skills for official works preferred. Familiar with Microsoft Office suite of software programs, Lotus Notes, etc.
• Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety
• Placement : Batam

 

Construction –Mechanical Technical Foreman (CP-A428)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES :

• High School education.
• Good written and verbal communication skills with the ability to communicate at all levels from management to field labor.
• Good technical knowledge and supervisory skills.
• Minimum of ten (10) years broad experience in all project phases, i.e. engineering, procurement and construction execution (Piping,fitting,Welding,machinery equipment package installation, civils works, pre commissioning, preservation)
• Will have at least five (5) years specific involvement in major process facilities.
• Previous experience with client team
• Placement : Cepu Site

 

Permit To Work Specialist (CP-A429)

RESPONSIBILITY AND DUTIES:

• Work with Company and contractors site management and Safety, Security Health, and Environment (SSHE) organizations to implement the project and site safety programs.
• Conduct regular assessments/verifications on the contractors Permit to Work (PTW) program, both in the field as well as at contractors onsite PTW office.
• Coach and advise contractor and subcontractors to establish, communicate, and implement an effective PTW program.
• Collect and analyze data relating to PTW effectiveness for reporting to project and functional management.
• Identify and work to eliminate short fall with the PTW program.
• Participate in the daily PTW coordination meeting and assist the contractors Permit Coordinator managing contractor and subcontractor PTW work pack reviews.
• Participate in TapRoot investigations and follow-up of incidents/accidents; assist with preparation for notifications/reports for communication of significant incidents to company project/functional management per project incident reporting procedures and matrix.
• Lead audits of contractor Permit to Work systems.
• Develop and present PTW related training programs.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Degree in Safety is preferred
• 8-10 years in Oil and Gas Construction. Preference in safety related roles.
• Essential 3-5 year experience in permit to work coordination.
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint.
• Placement : Cepu Site

 

QA/QC Engineer (CP-A430)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Having Experienced as QA/QC Engineer at least 2 years
• Having ability to read and draw using Autocad
• Knowing about Safety standard within oil and gas project
• Having experienced in making QA/QC document along fabrication and installation
• Max 30 years old
• Diploma degree electrical / mechanical engineer
• Placement : Selat Madura

 

Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.

• Di iklankan: 2014-06-26 00:00:00 - Standar Waktu Asia Tenggara
• Berakhir: 2014-07-03 00:00:00 - Standar Waktu Asia Tenggara