Selasa, 24 Juni, 2014 | 571 dibaca | 0 dikomentari | 0 dibagi

PT Radiant Utama Interinsco Tbk

We are the Oil & Gas Company seeking for the qualified candidates to fill the position of :

 

E&I Construction Tech Foreman – Field Facilities (CP-A411)

RESPONSIBILITY AND DUTIES:

• monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Support Construction Site Manager in monitoring and appraising the contractors performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
• Verify physical progress
• Monitor mechanical acceptance and start-up activities between operating unit and contractor
• Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
• Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
• Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
• Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
• Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
• Witness installation of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Monitor loop checks and review records for the same in accordance with technical requirements
• Monitor construction and installation and testing of instrument tubing works
• Review Contractors field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
• Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Minimum ten (10) years experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
• Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Well versed in safe work practices
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
• Placement : Cepu Site

 

Civil Inspector – Field Facilities (CP-A413)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Minimum fifteen (15) years experience in inspection of Civil QA/QC activities out of which at least 5 years in client position .
• Possess leadership qualities with a good analytical mind to manage the team of contractor QC personnel
• A self starter with proactive approach in foreseeing problems and setting in motion the corrective actions
• S1 graduate or equivalent with a good communication capability in Bahasa Indonesia and English
• Knowledge on International standards like ASCI, AWWA etc., and the material testing methods
• Experienced in witnessing the tests at the laboratories
• Possess experience to conduct regular spot checks / spot audits on the on going civil activities at site and implement corrective actions as required
• Experienced in witnessing the fabrication and installation of civil steel structures
• Experienced in inspection of civil road construction works, culverts, fly over / over pass
• Experienced in civil building inspection works, inclusive of associated architectural / interior decoration works
• Placement : Cepu Site

 

SHE&S Safety Site for Scaffolding specialist (CP-A415)

RESPONSIBILITY AND DUTIES:

• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Direct supervision of Rigging and Heavy Lifting [ onshore preferable ]
• Conduct regular safety inspections / assessments on-site and at key off-site subcontractor locations in accordance with established project and site safety plans or as requested by site team members
• Identify and work to eliminate hazards, unsafe conditions, and unsafe acts; work with company, contractor, and subcontractor management toward achieving an injury-free work place
• Keep site management apprised of significant safety issues, safety alerts and plans / progress towards resolving issues and eliminating hazards
• Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
• Communicate safety initiatives, achievements, experiences, and issues from other sites and projects with site team members and contractor / subcontractor safety advisors / management
• Participate in investigation and follow-up of incidents / accidents; prepare notifications / reports for communication of significant incidents to company project / functional management per project incident reporting procedures and matrix
• Coach and advise contractor / subcontractor safety professionals / management in incident investigation documentation, reporting, and follow-up, including root cause analysis and case management
• Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
• Prepare / provide a safety induction briefing to new team members and visitors to site
• Collect and share safety lessons learned with other sites and project and functional management

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• College level education or equivalent
• 5+ years as Specialist in Scaffolding Inspection
• 10+ years in Construction Safety-related positions, around 6 years in Onshore
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
• Placement : Cepu Site

 

Machinery Inspector ( CP- A416)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• experience in inspection of machinery (both rotating and static equipments) on major onshore construction projects
• Knowledgeable on international standards like ANSI, API, ASME etc. on equipment instDellation and inspection
• Exposure to fabrication / installation inspection of skid mounted package equipments, stand alone static / rotating equipments like pumps, compressors, diesel generators, vessels etc. in onshore oil and gas projects.
• Experienced in hot and cold alignment works of rotating equipments. Knowledge on use of specialised tools for alignment / levelling purposes.
• Experienced in equipment internal inspection works, hydrotests / leak tests etc.
• Able to read GA drawings and equipment installation drawings. Also read P&ID and isometric drawings for interfacing activities.
• Exposure to safe rigging and lifting practices for safe lifting and installation of equipments / skids. Able to understand and then co-ordinate with HSE / Rigging teams for safe installation practices.
• Working knowledge on painting and insulation works
• Knowledge on bolt torque tightening works
• Exposure to SKPI requirements for equipment installation certification
• Familiar with MIGAS regulations for cranes load testing
• Experienced in shop / field valve testing works as per API, ANSI / ASME persyaratan
• Experienced in witnessing safety relief valve pop–up testing
• Experienced in installation inspection of heat tracing piping / tubing works
• Exposure to work permits system (e.g. hot work, confined space etc.) and implementation of safe work practices
• Placement :Cepu Site

 

Construction –Mechanical Technical Foreman (CP-A418)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES :

• High School education.
• Good written and verbal communication skills with the ability to communicate at all levels from management to field labor.
• Good technical knowledge and supervisory skills.
• Minimum of ten (10) years broad experience in all project phases, i.e. engineering, procurement and construction execution (Piping,fitting,Welding,machinery equipment package installation, civils works, pre commissioning, preservation)
• Will have at least five (5) years specific involvement in major process facilities.
• Previous experience with client team
• Placement : Cepu Site

 

Permit To Work Specialist (CP-A419)

RESPONSIBILITY:

• Work with Company and contractors site management and Safety, Security Health, and Environment (SSHE) organizations to implement the project and site safety programs.
• Conduct regular assessments/verifications on the contractors Permit to Work (PTW) program, both in the field as well as at contractor s onsite PTW office.
• Coach and advise contractor and subcontractors to establish, communicate, and implement an effective PTW program.
• Collect and analyze data relating to PTW effectiveness for reporting to project and functional management.
• Identify and work to eliminate short fall with the PTW program.
• Participate in the daily PTW coordination meeting and assist the contractors Permit Coordinator managing contractor and subcontractor PTW work pack reviews.
• Participate in TapRoot investigations and follow-up of incidents/accidents; assist with preparation for notifications/reports for communication of significant incidents to company project/functional management per project incident reporting procedures and matrix.
• Lead audits of contractor Permit to Work systems.
• Develop and present PTW related training programs.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Degree in Safety is preferred
• 8-10 years in Oil and Gas Construction. Preference in safety related roles.
• Essential 3-5 year experience in permit to work coordination.
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint.

 

Scaffolding Inspector

Qualifications:

• Minimum 3 year experience
• MIGAS Certified
• Sea Survival certified

 

Supervisor

Qualifications:

• Minimum 3 year experience
• Sea Survival Certified
• MIGAS certified

 

Scaffoldder

Qualifications:

• Minimum 3 year experience in erection and installation for onshore scaffolding construction, lifting, rigging, and liftng equipment selection such as wire slings, shackles, lifting method, etc.
• Additional certification to local government requirements shall be provided as appropriate.
• MIGAS certified
• Sea Survival certied

 

Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.

• Di iklankan: 2014-06-24 00:00:00 - Standar Waktu Asia Tenggara
• Berakhir: 2014-07-08 00:00:00 - Standar Waktu Asia Tenggara