Selasa, 17 Juni, 2014 | 641 dibaca | 0 dikomentari | 0 dibagi

Samco Indonesia 1 of 2

We are growing oil and gas services Company. Some of our clients are:,VICO, Kangean Energy Indonesia, Husky CNOOC, Petronas Carigali Muriah LTD, Exxon Mobil, Total, CNOOC ses LTD

 

SENIOR MECHANICAL & PIPING INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

• Scope of Work :
• Assist in the approval of pipe welding methods, installations, inspections, and testing, and procedures.
• Conduct inspection on Contractor’s supplied equipment and pipe materials as well as field piping to ensure compliance with spesifications and codes.
• Witness hydrostatic tests and satisfactory operations of in-line items such as valves, orifice, drain system, PSV etc.
• Inspect equipment/pipe support and hangers to ensure ail are assembled and secure correctly and that the line can be safely loaded.
• Ensure acceptable edge preparations, fit-ups and welding of pipes.
• Maintain all test record.
• Participate in the resolution of the quality problems as governed by ITP.
• Carry our detailed visual inspectionon equipment and recommend strip-down if necessary to ascertain speedy and safe commisioning of mechanical items. Provide FAT assistant/ inspection for all equipment
• Coordinate with CONTRACTOR to minimize work interfence and delays due to procedures, testing etc.
• Ensure safety standards and requirements are observed and bring policy matters to attention of superiors.
• Assist in preparation of field change notices, extra work orders and back charge notices when required.
• Anticipate and take corrective actions to prevent quality problems, failures, defective works and deficient reports.

 

SENIOR ELECTRICAL/INSTRUMENT INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Coordinate closely with CONTRACTOR to minimize work interference due to engineering or construction quality problems
• Ensure that proper quality control techniques and procedures are established by the contractor. Ensure that quality control is carried out during the installation phase.
• Appraise the quality and perfomance of contractor’s field personnel.
• Keep QA engineer advised on below average performance of contractor’s field personnel.
• Supervise and witness Megger Tests and Continuity checks for all cables.
• Monitor the contractor’s efforts to verify that electrical and instrument material and equipment supplied meet the project spesification.
• Ensure correct inventory and proper inspection records are maintained by contractor.
• Check to ensure adequate and proper inspection records are maintained by contractor.
• Participate in the resolution of quality problems as directed.
• Assist in the preparation of constraction punch list.
• Provide FAT assistant/ inspection for all equipment.
• Ensure safety standards and requirements are observed and bring policy matters to attention of superior
• Corporate with and assist contractor and others, where possible, in the achievement of quality works.

 

SENIOR GENERAL INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Coordinate closely with CONTRACTOR to minimize work interference due to all testing or procedures qualification requirements.
• Interpret results of radiography and other NDT methods.
• Monitor project welding quality.
• Witness welding procedure qualifications and welder perfomance test.
• Maintain records on test, evaluationand measurements
• Participate in the resolution of the quality problems as governed by ITP.
• Maintain records of works performed within assigned responsibility and ensure the followings : quality of material used, verify qualification of contractor’s personnel, approved methods are used, early warning of possible problem areas to the QA Engineer and take corrective actions. keep the QA Engineer update of the current quality status
• Coorperate & assist CONTRACTOR and other, where possible, in the achievement of quality goals
• Prepare work planning covering inspection works
• Assist in preparation of field change notices, extra work orders and back charge notices when required
• Maintain records of approved procedures, rejections and corrective actions
• Ensure safety standars and requirements are observed and bring policy matters to attention of superiors (Discipline Engineers and Site Resident Engineer)

 

SENIOR ELECTRICAL/INSTRUMENT INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Coordinate closely with CONTRACTOR to minimize work interference due to all testing or procedures qualification requirements.
• Interpret results of radiography and other NDT methods.
• Monitor project welding quality.
• Witness welding procedure qualifications and welder perfomance test.
• Maintain records on test, evaluationand measurements
• Participate in the resolution of the quality problems as governed by ITP.
• Maintain records of works performed within assigned responsibility and ensure the followings : quality of material used, verify qualification of contractor’s personnel, approved methods are used, early warning of possible problem areas to the QA Engineer and take corrective actions. keep the QA Engineer update of the current quality status
• Ensure all welding works comply with the requirement of welding procedure spesification (WPS)
• Cooperate with and assist CONTRACTOR and others, where possible, in the achivement of quality goals.
• Evaluate, verify or check adequacy of welding equipment
• Review electrode selection, storage and maintenance
• Monitor, verify or check supplies and materials (including grinding and back• gouging) to be welded and the type of weld to be produced
• Ensure acceptable fit-ups including joint edge preparation and configuration.
• Conduct dimensional inspections as required for verfications
• Visually inspect and monitor welding operations (including grinding and back gouging) and finished works.
• Determine use of appropriate NDT methods and evaluate test results.
• Follow-up on nonconformance and corrective actions including administrative verification.
• Enforce safety in welding , hot work and NDT operations.
• Establish and maintain record of welding procedures, welder Qualifications/disqualifications, rejects and repairs to ensure that factual and complete information is available to respond to request and recommendations of Quality Assurance Auditors
• Make provisions to be informed of any special materials which arrive at site for welding so that new procedures and welder’s test can be formatted if necessary
• Monotir repair rates of all welders so as to avoid excessive delays due to high rejection rates and recommend, through QA Engineer, for welder re-testing or replacement
• Maintain records of progress of welding operations
• Assist in ensuring requirements of regulatory authorities and/or Quality Assurance Auditors are implemented and satisfactory
• Ensure safety standars and requirements are observed and bring policy matters to attention of superiors (Discipline Engineers and Site Resident Engineer)

 

SENIOR QUALITY/NDT INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Review all NDT procedures and assist in approval
• Ensure NDT operators are qualified, certified and competent to do the job. Ensure the equipment is suitable for the job, calibrated and in good condition
• Monitor the performance of NDT activities including interpretation of result
• Verify NDT work by audit if required
• Ensure NDT records including radiographic films are properly kept, maintained, packed and easily retrievable
• Ensure that NDT Contractros comply with the safety requirement during the transportation, storage and use of radioactive sources
• Ensure result of NDT are correct and satisfy the acceptance level of work requirement
• Participate in the resolution of the quality problems as directed by QA Engineer
• Prepare schedules covering his work when required by project controls section
• Assist in preparation of field change notices, extra work orders and back charge notices when required
• Anticipate and take corrective actions to prevent quality problems, failures, defective works and deficient reports
• Submit daily work activity report and other reports as required
• Ensure safety standars and requirement are observed and bring policy matters to attention of superiors

 

SENIOR DIMENSIONAL INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Coordinate closely with CONTRACTOR to minimize work interference due to engineering or construction quality problem
• Verify structure dimension including elevation angle, length, girth, etc,. Conduct dimensional quality inspection for verification and ensure acceptable fit-up
• Maintain records of works performed within assigned responsibility and ensure the followings: quality of material used, verify qualification of contractor’s personnel, approved methods are used, early warning of possible problem areas to the QA Engineer and take corrective actions. Keep the QA Engineer update of the current quality status
• Assist in preparation of field change notices, extra work orders and back charge notices when required
• Anticipate and take corrective actions to prevent quality problems, failures, defective works and deficient reports
• Participate in the resolution of the quality problems as directed by QA Engineer
• Prepare schedules covering his work when required by project controls section

• -Assist in ensuring requirements of regulatory autorities and/or Quality Assurance Auditors are implemented and satisfactory
• Ensure safety standards and requirements are observed and bring policy matters to attention of superior (Discipline Engineers and Site Resident Engineer)

 

SENIOR STRUKTURAL INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Coordinate closely with CONTRACTOR to minimize work interference due to testing or procedure qualification requirements
• Interpret result of radiography and other NDT methods
• Monitor project construction quality
• Maintain records on test, evaluation and measurements
• Participate in the resolution of the quality problems as governed by ITP
• Assist in preparation of field change notices, extra work orders and back charge notices when required
• Anticipate and take corrective actions to prevent quality problems, failures, defective works and deficient reports
• Submit daily work activity report and other reports as required
• Ensure safety standars and requirements are onserved and bring policy matters to attention of superiors

 

SENIOR PIPELINE INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Coordinate closely with CONTRACTOR to minimize work interference due to testing or procedure qualification requirements
• Ensure installation of Infield Flowlines, Export Pipeline (Offshore & Onshore), Risers and PLEM are complying with related Procedures
• Interpret results of radiography and other NDT methods
• Inspect and monitor project welding quality & operations
• Maintain records on test, evaluation and measurements
• Ensure all welding works and NDT works comply with the requirement of Welding Procedure Specification (WPS) and NDT Procedures
• Visually inspect and to ensure Field Joint Coating & Anodes installation are comply with Procedures
• Participate in the resolution of the quality problems as governed by ITP
• Maintain records of works performed within assigned responsibility and ensure quality of material used, verify qualification of personnel performing the work, ensure approved methodes are used, ensure advance warnings of possible problem areas of items is provided to the QA Enginner and verify that corrective actions including repair are taken. Keep the QA Enginner informed of the current quality status
• Coorperate with and assist CONTRACTOR and others, where possible, in the accievement of quality goals
• Evaluate, verify or check adequecy of welding equipment
• Review electrode selection, storage and maintenance
• Monitor, verify or check supplies and materials (including grinding and backgouging) to be welded and the type of weld to be produced
• Ensure acceptable fit-ups including pipe joint edge preparation and configuration
• Conduct dimensional inspections as required for verifications

 

SENIOR CIVIL & GEOTECHNICAL INSPECTOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Ensure quality of overall material used, verify qualification of personnel performing the work, ensure appoved procedures/methods are used, ensure advance warnings of possible problem areas of items provded to the QA Engineer and verify corrective actions including repair. Keep QA Engineer informed of the current quality status
• Having sound knowledge and proficiency to supervise, control and reporting the quality of

1. Earthwork operation, quality control, equipment and testing (inclusive of ground improvement work)
2. Pilling operation, quality control, equipment (especially hydraulic hammer and pipe testing (static and dynamic)
3. Concreate work, quality control, equipment and concrete testing
4. Steelwork, quality control, equipment and steelwork NDT

• Sound proficiency in application and result interpretation, supervisory and control of geodetic work (equipment, software and benchmarking)
• Coordinate with CONTRACTOR to minimize work interference on testing or procedure qualificaiton requirement
• Cooperate and assist CONTRACTOR & others, where possible in the achievement of quality goals
• Asist in preparation of field change notices, extra work orders and back charge notices when required
• Monitor, verify or check provision of incoming material (quality, material certificate, supply status etc)
• Conduct dimensional quality inspection for verification and ensure acceptable fit-up during concrete work (formwork, re-baring, and also during steel structure fabrication and erection)
• Follow up on nonconformance and corrective actions including administrative verification

• Having an analytical and time management aptitude to maintain records of backlog and progress of overall civil / Structure work performed (including ground improvement)

• Maintain records on testing, evaluation and measurement. Monitor repair / corrective work
• Participate in the resolution of the quality problems as directed by QA Engineer
• Assist in ensuring requirement of regulatory authorities and/or Quality Assurance auditors are implemented and satisfactory
• Enforce and ensure safety standars and requirements are observed and biring policy matters to attention of superior

 

EXPEDITOR

Requirements:

• Male
• Minimum D3 from any related background
• Have experience in the field, no color blind and have a healthy body

Scope of Work :

• Contact vendor and shipper to ensure that merchandise, supplies, and equipment are forwardedon specified shipping date
• Contact vendor by email, phone,or visit to verify shipment of goods on specified date
• Communicate with transportation company to preclude delays in transit
• Arrange for distribution of materials upon arrival
• Contact vendors for materials requistion
• Inspect products for quality and quantity to ensure adherence to spesifications
• Verify completeness of shipping / material delivery document to ensure the compliance to regulation for entering ports of Indonesia.

 

Please send your latest CV with recent photograph to:

recruitment@samco-energy.com cc faiz@samco-energy.com

Please note (PRO) as your application subject

• Di iklankan: 2014-06-17 00:00:00 - Standar Waktu Asia Tenggara
• Berakhir: 2014-07-01 00:00:00 - Standar Waktu Asia Tenggara