Rabu, 26 Maret, 2014 | 516 dibaca | 0 dikomentari | 0 dibagi

PT Air Energi Indonesia

With over 30 years experience, Air Energi are the premier supplier of trusted expertise to the oil and gas industry. Headquartered in Manchester UK, Air Energi has regional hubs in Houston, Doha, Singapore and Brisbane.
We have offices in 35 locations worldwide, experience of supply for 50 countries worldwide, and through our company values: Safe, knowledgeable, innovative, passionate, inclusive and pragmatism, WE DELIVER, each and every time.
Currently we are seeking qualified candidates for below positions:

 

Commissioning Supervisor - Electrical

Qualifications

• DIPLOMA Engineering discipline
• 15 years of experience in Electrical, 5 years of experience as Commissioning Supervisor
• Ability to read Schematics and Single Line Diagram
• Able to speak English
• Work under the direction of the Lead Electrical Commissioning Engineer to assure timely, appropriate and demonstrable commissioning of the facilities with due regard to the environment and health and safety of personnel in his or her discipline
• Apply and share with team members experience and lessons learned from previous Projects
• Input of relevant information to the Completions Management System for the Electrical discipline
• Be conversant with check sheet Completion and Management
• Develop supporting Commissioning documentation and conversant with IT application
• Liaise with construction during completion to ensure the facilities are handover in accordance with specifications and with the minimal quantity of punch list items.
• Assist Sub-contractors Discipline Engineers on issues of commissioning priorities, commissioning integrity, safe work practices, schedule compliance and documentation of commissioning progress and issues.
• Ensure commissioning safety and that any incidents and near misses are reported
• Ensure commissioning activities are implemented in accordance with the projects Operations Permit to Work system
• Prepare daily reports re: progress and commissioning / materials / logistics issues.
• Verify commissioning is completed and documented in accordance with approved commissioning procedures
• Perform all Pre-Commissioning and Commissioning function tests relevant to the Mechanical discipline
• Interface with other discipline Commissioning Engineers to commission systems as required
• Liaise with Operations on issues of commissioning implementation
• Raise permits to work prior to submission to Permit Controller
• Verify mechanical completion, pre-commissioning and commissioning activities
• Assist with Preparation of all certification documents for completion and hand-over to Operations.
• Ensure commissioning is in accordance with approved commissioning procedures

 

Commissioning Supervisor - Instrumentation

Qualifications

• DIPLOMA Engineering discipline
• Minimum 15 years of experience in Instrumentation Discipline, Minimum of 5 years of experience as Commissioning Supervisor
• Ability to read P&ID's, Schematics and Layout plans
• Able to speak English
• Work under the direction of the Lead Instrument Commissioning Engineer to assure timely, appropriate and demonstrable commissioning of the facilities with due regard to the environment and health and safety of personnel in his or her discipline.
• Apply and share with team members experience and lessons learned from previous Projects
• Input of relevant information to the Completions Management System for the Instrument discipline
• Be conversant with check sheet Completion and Management
• Develop supporting Commissioning documentation and conversant with IT application
• Liaise with construction during completion to ensure the facilities are handover in accordance with specifications and with the minimal quantity of punch list items.
• Assist Sub-contractors Discipline Engineers on issues of commissioning priorities, commissioning integrity, safe work practices, schedule compliance and documentation of commissioning progress and issues.
• Ensure commissioning safety and that any incidents and near misses are reported
• Ensure commissioning activities are implemented in accordance with the project's Operations Permit to Work system
• Prepare daily reports re: progress and commissioning / materials / logistics issues.
• Verify commissioning is completed and documented in accordance with approved commissioning procedures
• Perform all Pre-Commissioning and Commissioning function tests relevant to the Instrument discipline
• Interface with other discipline Commissioning Engineers to commission systems as required
• Liaise with Operations on issues of commissioning implementation
• Raise permits to work prior to submission to Permit Controller
• Verify mechanical completion, pre-commissioning and commissioning activities
• Assist with Preparation of all certification documents for completion and hand-over to Operations.
• Ensure commissioning is in accordance with approved commissioning procedures

 

Commissioning Supervisor - Mechanical (Rotating / Static)

Qualifications

• DIPLOMA Engineering discipline
• Minimum 15 years of experience in Mechanical Discipline, minimum 5 years of experience as Commissioning Supervisor
• Ability to read P&ID's, Schematics and Layout plans
• Able to speak English
• Work under the direction of the Lead Mechanical Commissioning Engineer to assure timely, appropriate and demonstrable commissioning of the facilities with due regard to the environment and health and safety of personnel in his or her discipline.
• Apply and share with team members experience and lessons learned from previous Projects
• Input of relevant information to the Completions Management System for the Mechanical discipline
• Be conversant with check sheet Completion and Management
• Develop supporting Commissioning documentation and conversant with IT application
• Liaise with construction during completion to ensure the facilities are handover in accordance with specifications and with the minimal quantity of punch list items.
• Assist Sub-contractors Discipline Engineers on issues of commissioning priorities, commissioning integrity, safe work practices, schedule compliance and documentation of commissioning progress and issues.
• Ensure commissioning safety and that any incidents and near misses are reported
• Ensure commissioning activities are implemented in accordance with the project's Operations Permit to Work system
• Prepare daily reports re: progress and commissioning / materials / logistics issues.
• Verify commissioning is completed and documented in accordance with approved commissioning procedures
• Perform all Pre-Commissioning and Commissioning function tests relevant to the Mechanical discipline
• Interface with other discipline Commissioning Engineers to commission systems as required
• Liaise with Operations on issues of commissioning implementation
• Raise permits to work prior to submission to Permit Controller
• Verify mechanical completion, pre-commissioning and commissioning activities
• Assist with Preparation of all certification documents for completion and hand-over to Operations.
• Ensure commissioning is in accordance with approved commissioning procedures

 

Commissioning Supervisor - Piping

Qualifications

• DIPLOMA Engineering discipline
• Minimum 15 years of experience in Piping Discipline, Minimum 5 years of experience as Piping Supervisor
• Ability to read P&ID's, Isometric drawings
• Able to speak English
• Work under the direction of the Supervisor of Piping Commissioning to assure timely, appropriate and demonstrable commissioning of the facilities with due regard to the environment and health and safety of personnel in his or her discipline.
• Apply and share with team members experience and lessons learned from previous Projects
• Input of relevant information to the Completions Management System for the Piping discipline
• Be conversant with check sheet Completion and Management
• Develop supporting Commissioning documentation and conversant with IT application
• Liaise with construction during completion to ensure the facilities are handover in accordance with specifications and with the minimal quantity of punch list items.
• Assist Sub-contractors Discipline Engineers on issues of commissioning priorities, commissioning integrity, safe work practices, schedule compliance and documentation of commissioning progress and issues.
• Ensure commissioning safety and that any incidents and near misses are reported
• Ensure commissioning activities are implemented in accordance with the project's Operations Permit to Work system
• Prepare daily reports re: progress and commissioning / materials / logistics issues.
• Verify commissioning is completed and documented in accordance with approved commissioning procedures
• Perform all Pre-Commissioning and Commissioning function tests relevant to the Piping discipline
• Interface with other discipline Commissioning Engineers to commission systems as required
• Liaise with Operations on issues of commissioning implementation
• Raise permits to work prior to submission to Permit Controller
• Verify mechanical completion, pre-commissioning and commissioning activities
• Assist with Preparation of all certification documents for completion and hand-over to Operations.
• Ensure commissioning is in accordance with approved commissioning procedures
• Be conversant with various method of pipe cleaning including chemical pickling.

 

Senior Rotating Engineer

Qualifications

• More than 7 - 10 years working experience in engineering for rotating equipment.
• Have good technical skill especially in engineering for rotating equipment.
• Have good interdiscipline coordination
• Have capability to perform technical discussion / meeting with Client or Vendor.
• Have experience in onshore & offshore design
• Good teamwork

 

Rotating Engineer

Qualifications

• More than 5 years working experience in engineering (3 years in rotating equipment)
• Have good technical skill especially in engineering for rotating equipment
• Have good interdiscipline coordination
• Have capability to perform technical discussion / meeting with Client or Vendor
• Have experience in onshore & offshore design
• Good teamwork

 

Finance Manager

Qualifications

• Ensure financial reports are submitted according to the schedule
• Put in place a tracking system to ensure the financial and management accounts fulfilled the requirement of the accounting standards, regulatory bodies and other requirements including tax and compliance and statutory audits and ensure execution of the tracking system.
• Ensure the credibility of the reports for financial performance assessment on the financial measures.
• Assist the Operational management in the preparation of the budget and forecast.
• Perform the analytical review of the financial performance against the budget and forecast and monitor the variances and provide inputs and recommendations for improvements.
• Monitor and manage the working capital management, i.e. the cash, receivables and payables status on a regular basis.
• Manage interface with customers on areas relating to invoicing, payment, collection of Withholding/ VAT (Output) tax payment slips and identify opportunity for improvement in the invoicing/ collection process

 

Lead Engineer

Qualifications

• Degree in Mechanical Engineering with 10-12 years relevant industry experience in offshore/subsea construction

 

Project Manager

Qualifications

• Degree in Civil/Mechanical Engineering degree with 8-10 years relevant industry experience in offshore/subsea construction with project management background

 

Project Engineer

Qualifications

• Degree in Civil Engineering with 8-10 years relevant industry experience in offshore/subsea construction

If you have the required experience and would like the opportunity to join with us, please email your application to:
indonesia.recruitment@airenergi.com 

• Di iklankan: 2014-03-26 00:00:00 - Standar Waktu Asia Tenggara
• Berakhir: 2014-04-09 00:00:00 - Standar Waktu Asia Tenggara