Rabu, 19 Maret, 2014 | 570 dibaca | 0 dikomentari | 0 dibagi

PT Supraco Indonesia

PT. SUPRACO INDONESIA

Jakarta based company with more than 33 years of experience in providing services to oil and gas industry and Geothermal in Indonesia. We are seeking for best candidates to fill the vacant position for our projects

 

E&I Construction Tech Foreman - Field Facilities (CP-A351)

RESPONSIBILITY AND DUTIES:

• monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Support Construction Site Manager in monitoring and appraising the contractors performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
• Verify physical progress
• Monitor mechanical acceptance and start-up activities between operating unit and contractor
• Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
• Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
• Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
• Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
• Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
• Witness installation of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Monitor loop checks and review records for the same in accordance with technical requirements
• Monitor construction and installation and testing of instrument tubing works
• Review Contractors field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
• Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Minimum ten (10) years experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
• Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Well versed in safe work practices
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
• Placement : Cepu Site

Welding / Piping Inspector Offshore (CP-A352)

RESPONSIBILITY AND DUTIES:

• Assist reviewing WPS, WQT records and welding inspection related QC documents
• Witness and oversee daily activities and related inspection activities in piping, structural, mechanical, and E&I disciplines. This includes visual and NDT checks like RT, MT, PT and UT.
• Witness / monitor NDT activities, and interpret / review NDT reports on RT, MT, PT and UT
• Monitor and inspect exotic material welding works (DSS, SDSS and CRA) inclusive of PMI and ferrite checks
• Monitor in-process welding parameters like fit up, purging and purging level (O2 checking), heat input and maintenance of inter-pass temperature, passivation activities, flushing, etc.
• Monitor welder performance continuously, set in motion the corrective actions when the quality levels / trend is not in acceptable levels
• Monitor welding consumable handling on site, and conduct daily spot checks in the field to ensure proper handling of welding consumables. Review original welding consumable material certificates for compliance to codes and specifications where required.
• Monitor / surveillance of material traceability in weldments
• Witness / monitor weld repair activities and welding distortion correction activities
• Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
• Verify fabrication fit-up, alignment, and dimensional tolerances
• Participate in line walk before hydro test, preparation of punch lists and follow up of the same for close out
• Witness piping hydrotest and flushing works, witness reinstatement checks for final acceptance
• Witness Nitrogen (N2) leak tests on piping systems
• Witness furnace PWHT and Local PWHT of piping works
• Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Project Construction Surveillance Program

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Have minimum of 15 years in welding inspection activities working to international standards like ANSI B31.3 / API 650 / ASME Sec IX / Norsok / NACE RP 0175. Possess Minimum CSWIP 3.1 or AWS CWI welding inspector qualifications.
• Possess ASNT NDT L-II in RT / MT / PT / UT and able to review radiographs to various international standards.
• Possess a proactive approach plus willingness to closely monitor and educate the exotic alloy welders
• Experience in welding and inspection of exotic alloys like Duplex SS / Super Duplex SS / Inconel 825 is mandatory and highly preferred
• Knowledge on purging and maintenance of heat input / interpass temperature required. Familiar with PMI (P-met) / Ferrite checking and review of these reports for compliance.
• Experience in working on oil and gas projects involving sour oil service is preferred
• Able to read and understand P&IDs, isometrics and GA drawings, both engineering and shop drawings
• Able to review PWHT charts and conduct in process spot checking
• Able to review hydrotest packs, witness hydrotests and reinstatement works for system acceptance
• Experienced in Nitrogen leak tests preferred
• Thorough understanding of applicable industry specifications
• Native tongue in Bahasa Indonesia with proficiency in spoken and written English language skills for official works preferred. Familiar with Microsoft Office suite of software programs, Lotus Notes, etc.
• Well versed in safe work practices including co-ordination with contractors on ensuring radiation safety
• More than 5 years experience in Piping / Welding for Offshore Pipeline Project
• Placement : Onshore / Offshore Cepu Site

 

Civil Inspector - Field Facilities (CP-A353)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES

• Minimum fifteen (15) years experience in inspection of Civil QA/QC activities out of which at least 5 years in client position .
• Possess leadership qualities with a good analytical mind to manage the team of contractor QC personnel
• A self starter with proactive approach in foreseeing problems and setting in motion the corrective actions
• S1 graduate or equivalent with a good communication capability in Bahasa Indonesia and English
• Knowledge on International standards like ASCI, AWWA etc., and the material testing methods
• Experienced in witnessing the tests at the laboratories
• Possess experience to conduct regular spot checks / spot audits on the on going civil activities at site and implement corrective actions as required
• Experienced in witnessing the fabrication and installation of civil steel structures
• Experienced in inspection of civil road construction works, culverts, fly over / over pass
• Experienced in civil building inspection works, inclusive of associated architectural / interior decoration works
• Placement : Cepu Site

Coating Inspector Offshore (CP-A354)

RESPONSIBILITY AND DUTIES:

• Verify required coating inspection methods are performed on Offshore pipeline, including DFT, holiday testing, etc.
• Monitor mixing and application of coating by contractor.
• Maintain daily log of activities.
• Oversee application of field joint coating.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Extensive training and experience in coatings & coatings inspection, application methods & testing.
• Previous training as a NACE coatings inspector is helpful.
• Knowledge of surface preparation methods & other requirements for obtaining desired performance from coatings.
• Seven (7) years experience in coatings & coatings inspection.
• More than 5 years experience in Offshore Pipeline Construction till Installation Project
• Overseas pipeline experience is helpful.
• Competent in PC skills relative to Microsoft Word, Excel, and e-mail system
• Placement : Onshore / Offshore Cepu Site

 

SHE&S Safety Site (CP-A355)

RESPONSIBILITY AND DUTIES:

• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Conduct regular safety inspections / assessments on-site and at key off-site subcontractor locations in accordance with established project and site safety plans or as requested by site team members
• Identify and work to eliminate hazards, unsafe conditions, and unsafe acts; work with company, contractor, and subcontractor management toward achieving an injury-free work place
• Keep site management apprised of significant safety issues, safety alerts and plans / progress towards resolving issues and eliminating hazards
• Advise site team of safety initiatives, issues, challenges, and incident investigations / follow-up
• Communicate safety initiatives, achievements, experiences, and issues from other sites and projects with site team members and contractor / subcontractor safety advisors / management
• Participate in investigation and follow-up of incidents / accidents; prepare notifications / reports for communication of significant incidents to company project / functional management per project incident reporting procedures and matrix
• Coach and advise contractor / subcontractor safety professionals / management in incident investigation documentation, reporting, and follow-up, including root cause analysis and case management
• Monitor work processes to ensure compliance with the site work permit system and area / system responsibilities
• Prepare / provide a safety induction briefing to new team members and visitors to site
• Collect and share safety lessons learned with other sites and project and functional management

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• College level education or equivalent
• 10+ years in Construction Safety-related positions, around 6 years in Onshore
• Good computer skills including Lotus Notes, Microsoft Excel, Microsoft Word and Microsoft PowerPoint
• Placement : Cepu Site

Environmental, Socioeconomic and Regulatory (CP-A356)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Broad project management, technical and SH&E skills with good understanding of working in a project setting and an ability to interact amicably with various external stakeholders
• 5+ years broad-based experience preferred, with prior experience in one or more related disciplines (i.e. Environmental, Regulatory and Socioeconomic)
• Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
• Knowledge of EMDC strategies and key business drivers
• Good interpersonal and communication skills in English and Bahasa Indonesia. Ability to speak Jawanese is an additionally desirable attribute.
• Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
• Willingness to undertake business travel and/or field based short term assignments
• Ability to interact proactively in the Projects interest, with EPC contractor, local Government offices and local community in East Jawa province.
• Placement : Jakarta/Cepu Site

 

Barge Supervisor (CP-A357)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Male
• Age max 50 years old
• Having ANT III Certificate
• Having experienced as a Barge Supervisor at least 2 years
• Preferred candidates who live in Kalimantan are
• Placement : Balikpapan

 

Agency Manager (CP-A358)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Lead the development of company contracting strategies, programs, and tools designed to meet company business plans to increase revenue, maximize profits, and grow market share.
• Collaborate with internal business partners, field sales organization, and Corporate Accounts to implement contracting programs and develop new ones that align with company objectives.
• Work with field sales organization to implement contracting and pricing strategies.
• Conduct field work including :
  • Present contracting offering to customers
  • Monitor and track contract activity and share best practices within the sales organization
• Monitor external pricing to develop new pricing strategies that enable sales growth while maximizing brand profitability.
• Lead the newly formed Marketing Business Analytics function including :
  • Issue sales reports to measure brand performance
  • Track sales promotions
  • Measure performance in target accounts
  • Develop account planning tools
  • Monitor and track Key Performance Indicators
  • Business forecasting
• Lead, direct, manage, and support all direct reports to achieve departmental and group objectives.
• Develop individual objectives and participate in the Performance Evaluation and Development (PED) process in a timely manner.
• Develop specific performance metrics to evaluate individual and team contributions.
• Provide training and manage career/professional development for direct reports.
• Supervise Marketing Business Manager/Analytics.
• Perform other related duties as assigned.
• Placement : Jakarta

 

Mechanical Engineer (CP-A359)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Working Knowledge of:
  • Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
  • Piping fabrication methods
  • Welding processes and NDE techniques including evaluation methods
  • Piping, Isometrics and shop Drawings
  • Mechanical installation practices
• Thorough understanding of applicable industry specifications
• Good oral and written English language skills
• Well versed in safe work practices
• Proficient in Microsoft Office suite of software programs, Lotus Notes, etc.
• Read, write, and speak fluent English, especially as it applies to technical communications
• Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.

Maintenance System Completer (CP-A360)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Electrical/Instrumentation/Mechanical Background
• Min 1 year experience in the field
• Familiar with Process Flow Diagram and Instrument Diagram
• Computer Literate, min Microsoft Office
• Familiar with mainenance system
• Hands on experience with instrumentation/electrical/mechanical tools and equipment
• Placement : Offshore Surabaya

 

Please send your application to recruitment@supraco.com with detailed resume and recent photograph and put job title name and code on subject email.

• Di iklankan: 2014-03-19 00:00:00 - Standar Waktu Asia Tenggara
• Berakhir: 2014-04-02 00:00:00 - Standar Waktu Asia Tenggara