Selasa, 11 Maret, 2014 | 494 dibaca | 0 dikomentari | 0 dibagi

PT. Inti Brunel Teknindo 1 of 2

PT. Inti Brunel Teknindo is the sole agent for Brunel Energy (www.brunel.net), provides specialist personnel to the international oil & gas, petrochemical, power generation and construction industries. Our clients are predominantly major operating companies and international engineering or construction companies. We have a global network with local market knowledge in 97 locations around the world. Currently, our client are looking for some positions based in Indonesia.

 

Junior Process Engineer

Jakarta

DETAILS:

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 2 years experience in Offshore / Onshore Oil and Gas Engineering, Design and Commissioning Support for Process Engineer.
• Should possess hands on experience in handling Process Engineering software like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry

 

2 Mechanical Engineer

Jakarta (6 months)

Requirements

• Bachelor/Master Degree in Engineering (Mechanical or Metallurgy)
• 2+ years' experience in Engineering as Mechanical or Piping Engineer.
• Having experience for engineering of offshore/Onshore project design, installation or commissioning is advantage
• Familiar with industry and regulatory codes, standards and recommended practices from API, ASME, DNV, HES standard (e.g. SID), etc.
• Good skill in using PDMS, CAESAR, COMPRESS or PV Elite, and familiar with HTRI will be an advantage.
• Experience in developing RFQ, PO, ITP and equipment installation.
• Having experience in reviewing contractor's plans, procedures, and work output (e.g. deliverables).
• Knowledgeable of production operations and installation interfaces with Operations (Permit to Work, SIMOPs, Start-Up Procedures and Operations) is an advantage.
• Works effectively with others and strives to reach agreement on key interface issues. Has high ability to achieve goals using influence and trust. Ability to work with Operations Field Personnel is important
• Willing to be travel if required. Position based in Jakarta

Sr. Process Safety Engineer

Jakarta

DETAILS

• Bachelor degree from State of University, Majoring in Chemical Engineering
• Minimum 10 years experience in process safety engineering design for oil and gas industry.
• Experience in preparing safety philosophy, hazardous area classification, escape route, safety and fire fighting design, firewater demand calculation, firewater design.
• Experience in consequence modeling and flare/vent dispersion and radiation study
• Familiar with NFPA, IP codes
• Experience in software such as Pipenet, PHAST, FRED, FlareSim

 

Senior Process Engineer

Jakarta

DETAILS

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 10 years experience in Oil and Gas / Refining / Petrochemical Engineering.
• Shall have good written and spoken English language communication skills.
• Shall be able to check and verify the work of junior engineers and provide guidance as required.
• Should possess hands on experience in handling Process Engineering softwares like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers and drafters
• Should be able to co-ordinate with other disciplines and the client as an effective team worker.

 

Commissioning Supervisor - Electrical

Cepu

Details

• Reporting to - Electrical Engineer Commissioning
• Preferred qualifications:

• DIPLOMA Engineering discipline

Required experience:

• 5 - 10 Years in a Commissioning environment
• 5 - 10 years in a Construction environment is of benefit

Primary Function:

• Lead team of technicians during commissioning and start-up in the discipline of Electrical

Key Objectives:

• Lead the execution of work for Electrical Commissioning activities during the commissioning & start up phases of the project

Requirements:

• Good interpersonal skills for interfacing with all discipline personnel
• Knowledge of Electrical Equipment is advantage
• Ability to read Schematics and Single Line Diagram
• Good understanding of the completions/certification documentation process
• Competent IT skills are necessary for the use of Microsoft Office software.
• Able to speak English
• Can work under pressure

 

Instrument Tech Supervisor

Cepu

Details

• Primary Function

• Lead team of technicians during commissioning and start-up in the discipline of Instrument & Control
• Work under the direction of the Lead Instrument & Control Commissioning Engineer

• Key Objectives: Lead the execution on site of work for Instrumentation Commissioning activities during the pre-comm, comm, and start up phases of the project

Requirement

• Good interpersonal skills for interfacing with all discipline personnel
• Have depth knowledge of Instrument field devices, cabling, and communication with other systems
• Able to read all engineering documents such as : P&ID's, I/O list, Loop Drawing, GA drawing, Schematics Diagram and Layout Plans
• Good understanding of the completions documentation process

 

Commissioning Supervisor - Mechanical Rotating Static

Cepu

Details

• Reporting to - Lead Mechanical Commissioning
• Preferred qualifications:

• DIPLOMA Engineering discipline

Required experience:

• 5 - 10 Years in a Commissioning environment
• 5 - 10 years in a Construction environment is of benefit

Primary Function:

• Lead team of technicians during commissioning and start-up in the discipline of Mechanical
• Key Objectives:Lead the execution of work for Mechanical Commissioning activities during the commissioning & start up phases of the project

Requirements:

• Good interpersonal skills for interfacing with all discipline personnel
• Knowledge of Mechanical Equipment/systems and their interaction with other systems
• Ability to read P&ID's, Schematics and Layout plans
• Good understanding of the completions/certification documentation process
• Competent IT skills are necessary for the use of Microsoft Office software.

 

Commissioning Supervisor - Piping

Cepu

Details

• Reporting to - Piping Commissioning Technician
• Preferred qualifications:

• DIPLOMA Engineering discipline

Required experience:

• 5 - 10 Years in a Commissioning environment
• 5 - 10 years in a Construction environment is of benefit

Primary Function:

• Lead team of technicians during commissioning and start-up in the discipline of Mechanical

Key Objectives:

• Lead the execution of work for Mechanical Commissioning activities during the commissioning & start up phases of the project

Requirements:

• Good interpersonal skills for interfacing with all discipline personnel
• Knowledge of Mechanical Equipment/systems and their interaction with other systems
• Ability to read P&ID's, Isometric drawings.
• Some IT skills are necessary for the use of Microsoft Office software.

 

E&I Construction Superintendent - Field Facilities

Cepu

KEY RELATIONSHIPS:

• Reports To :Site Construction Manager
• Positions Supervised :E&I Technical Foreman

JOB FUNCTION:

• Ensure the installation of Electrical & Inspection (E&I) equipments / instruments are meeting the project specification quality requirements and / or vendor recommendations.
• Interfacing with other disciplines starting from receipt of the E&I items through calibration and installation to final pre-commissioning / commissioning activities. Maintain daily log of activities.
• Serve as a member of the Construction Planning & Execution Team
• Interface primarily with project team Construction Site Manager and Contractor's Construction Team as well as other Project Leads, i.e., discipline engineering leads, controls lead, quality coordinators and procurement advisors
• Participate/support/lead as requested discrete tasks to improve Construction systems and tools and updates to Construction schedules and plans
• Determine corrective actions needed in order to meet project objectives and work to have these implemented
• Monitor E&I construction and Mechanical Completion progress

RESPONSIBILITY AND DUTIES:

• Oversee and monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
• Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
• Monitor contractor's subcontract administration, field purchasing, materials handling procedures, warehousing activities and ensure proper expediting of subcontractors and materials as necessary to meet project's construction requirements.
• Participate in review of subcontracts and ensure that adequate control and changes in work procedures are established
• Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
• Support Construction Site Manager in monitoring and appraising the contractor's performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
• Verify physical progress and approve or endorse contractor invoices, as appropriate
• Coordinate mechanical acceptance and start-up activities between operating unit and contractor
• Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
• Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
• Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
• Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
• Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
• Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
• Witness installation of E&I control panels (both local and inside the control rooms)
• Monitor and witness continuity and meggering inspection works for cables
• Monitor cable laying works in trenches, through ducts and on cable trays
• Monitor loop checks and review records for the same in accordance with technical requirements
• Monitor construction and installation and testing of instrument tubing works
• Review Contractor's field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
• Assist and co-ordinate with other disciplines on electrical motors installation and alignments
• Interface, participate or co-ordinate in E&I pre-commissioning activities as required
• Preparation of punch lists
• Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement Cepu project Construction Surveillance Program.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• Minimum ten (10) year's experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
• Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
• Exposure to DCS instrumentation works and commissioning of the same
• Thorough knowledge on International standards on E&I like IEC etc.
• Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
• Well versed in safe work practices
• Computer literate with experience in using MS Office suite for preparing reports and maintaining data base

 

Facilities Engineer

Cepu

JOB FUNCTION:

The Facilities Engineer, as part of the Facilities Engineering Team, provides support to the Site Engineering Manager, Engineering Lead, and the Engineering Team by assuming responsibility for the coordination and stewardship of a broad range of engineering, planning and coordination activities. Based on project requirements, the Facilities Engineer may also be assigned responsibility for defined components or areas of the engineering work scope to ensure effective integration and execution of cross-discipline activities.

RESPONSIBILITY AND DUTIES:

Supports the Engineering Project Team with the coordination, execution and stewardship of some or all of the following selected activities:

• Area responsibility for the CPF Utilities, CPF Process or the Wellpads & Offsites
• Procurement - Engineering Interface and Engineering Management Processes
• Identification, facilitation, and reporting of critical and long lead equipment procurement issues
• Tracking and prioritization of construction and procurement support deliverables
• Engineering change management (Change Inquiries, Requests, Proposals, and MOCs)
• Interfacing with contractor(s) and MCL PT for problem solving and resolution of multi-discipline engineering issues
• Assisting the Facilities Engineer Specialist with data development and assimilation (narratives, charts, graphs, etc.) required for engineering surveillance and progress reporting
• Organize and coordinate as appropriate design / operability / constructability reviews and risk assessments
• Capture and communicate engineering lessons learned
• Follow-up on Quality audit findings related to engineering
• Recommending corrective actions where deficiencies in contractor's performance are uncovered and verifies actions are taken and desired results are achieved
• Assists the Facilities Engineer Specialist to coordinate specification deviations including Functional SME reviews where required
• Prepares MOCs for designated project component and ensures implementation of change
• Participates in technical reviews with contractor and vendor personnel
• Assists with coordination and stewardship of part-time functional support and SME utilization & budgets
• Assists the Facilities Engineer Specialist to coordinate external reviews (DRRs, CRRs, IPRs) and administers follow-up action plans

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:

• BS degree in an engineering field
• Minimum 7 years of experience through multiple function and project assignments in engineering activities
• Multi-disciplinary skill set and broad knowledge of engineering design office procedures and work processes
• Strong leadership, influencing, and interpersonal skills
• Strong organizational, coordination, planning, and interface skills
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs, Lotus Notes, etc.
• Excellent communication skills and ability to read, write, and speak fluent English

 

Please send your CV and related documents to: resume@brunel.co.id. Subject line should say "specific position" (e.g. Mechanical Engineer). Only shortlisted candidate will be process on next step.

• Di iklankan: 2014-03-11 00:00:00 - Standar Waktu Asia Tenggara
• Berakhir: 2014-03-25 00:00:00 - Standar Waktu Asia Tenggara