Jumat, 14 Pebruari, 2014 | 706 dibaca | 0 dikomentari | 0 dibagi

PT Technip Indonesia

PT Technip Indonesia

TECHNIP is a leading provider of Engineering, Technologies and Construction services for oil and gas, petrochemical and other industries;

In Asia-Pacific, Technip has been present for more than 20 years. As part of its expansion in Asia-Pacific, Technip established a subsidiary in Indonesia: PT. Technip Indonesia (PTTI), which services the Indonesian Oil and Gas, Petrochemical and General Industrial sectors. PTTI covers offshore and onshore field development, gas processing and liquefaction, refining and onshore pipelines. In non-oil sectors, PTTI covers fertilizers, chemicals, cement, life sciences, power generation and other growth market industries.

As part of our business expansion in Indonesia, we are seeking highly qualified professionals to fill in position listed below:

Sr. Process Engineer

(Jakarta & Balikpapan)

Requirements

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 10 years experience in Refining / Petrochemical Engineering.
• Shall have good written and spoken English language communication skills.
• Shall be able to check and verify the work of junior engineers and provide guidance as required.
• Should possess hands on experience in handling Process Engineering softwares like HYSYS, PIPESIM etc.
• Should be able to perform process calculations and develop process drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers and drafters
• Should be able to co-ordinate with other disciplines and the client as an effective team worker.

 

Sr. Process Safety Engineer

(Jakarta & Balikpapan)

Requirements

• Must possess minimum Bachelor degree in Chemical Engineering from a recognized, fully accredited university in Indonesia.
• Minimum of 10 years experience and above as Safety Engineer in Offshore / Onshore Oil and Gas Engineering, Refining, Petrochemical Engineering/ Operation/ Design and Commisioning Support for Senior Process Safety Engineer.
• Shall have good written and spoken English language communication skills.
• Shall be able to check and verify the work of junior engineers and provide guidance as required.
• Should possess hands on experience in handling Process Safety Engineering softwares like PIPENET, FLARESIM etc.
• Should be able to perform fire water hydraulic calculations and develop process safety drawings with precise knowledge
• Should have analytical knowledge and report writing capabilities.
• Should be familiar with international codes and standards applicable for Process Safety Engineering in Oil and Gas industry
• Should have enough supervisory skill to manage a team of engineers and drafters
• Should be able to co-ordinate with other disciplines and the client as an effective team worker.

 

Sr. Instrument Engineer

(Jakarta & Balikpapan)

Requirements:

• Shall have minimum 10 years experience and above as Senior Instrument Engineer in Oil and Gas Industry for Offshore and Onshore projects.
• Shall have an Engineering degree from a recognized university with good GPA.
• Shall be familiar with International Codes and Standards.
• Shall be Computer literate, e.g. be able to work on MS Office
• Shall possess good communication skills in English language.
• Shall have good proven working experience including but not limited to the following:
  • Preparation of datasheets for field instruments
  • Preparation of specification for systems such as DCS, ESD, F&G, Wellhead control panel, etc,
  • Review of layouts and other design engineering documents and drawings.
• Has knowledge and familiar working with Smart plant instrumentations software would be an added advantage

 

Sr. Project Accountant

(Jakarta)

Requirements:

• Must possess minimum Bachelor degree Economics/Finance/Accountancy.
• Minimum of 7 years experience and above in the related field is required for this position.
• Shall have good written and spoken English language communication skills.
• Should possess hands on experience in handling with ACCPAC, accounting software is preferable
• Preferably Staff (non-management & non-supervisor)s specializing in Finance - General/Cost Accounting or equivalent.

 

Sr. LQ Architect

(Jakarta)

Requirements:

• Bachelor Degree, Architectural Department
• Min. 7 year experience in the related field is required for this position.

Responsibility:

• Prepare Architectural Specification for Offshore Building
• Prepare Material Take Off and Weight Calculation
• Prepare Living Quarter and Electrical Building Design
• Prepare Room Function Specification
• Prepare Architectural MTO
• Drawing Review

 

Sr .Naval Architect

(Jakarta)

Requirements:

• Degree/Masters in Naval Architecture or Marine Engineering
• Min. 10 years working experience in related field
• Experience from load out transport and installation,
• Nice to have Floatover Wave loads on large volume structures experience, Wamit/ Wadam experience.
• MOSES software experience.
• Proficient in English, spoken and written

 

Mechanical Static Engineer

(Jakarta)

Requirements:

• The Candidate shall posses a recognized Degree in Mechanical with good communication skill.
• Possess at least minimum 3 years of design experience in various Static Equipment including Pressure Vessels, Air-coolers, Heat Exchangers, Fired-Heater, API-650 tanks for Onshore /Offshore application, (3 years experience in EPC Contracting work will be an advantage, including adequate Site and Test-Witness experience).
• Be able to work independently and have the ability to Lead a team of Static Equipment /Mechanical Engineers for oil & gas / petrochemical projects
• Be able to produce Engineering specifications /Requisitions/ perform Equipment selection for Client approval in fast-track environments and CONDUCT technical clarification meetings with potential Bidders /Clients
• Be thorough with the standards and good engineering practices of international oil companies, in addition to international codes such as ASME/ANSI, PD 5500, API-650/620, NACE, EN and ISO
• He must possess detailed knowledge of his field and able to perform technical audit / Pre-qualification meeting at Vendors premises

 

Instrument Engineer

(Jakarta & Balikpapan)

Requirements:

• Bachelors Degree or higher in Industrial, Instruments / Electronic Engineering or equivalent.
• Min. years experience in instrument engineering design in the Oil & Gas, Refineries, Petrochemical, Chemical and related industries.
• Self motivated, good attitude and willing to take responsibility
• Conversant with International Codes and Standards and Engineering Practices used in the industry - API, ASME & ISA etc.
• Good engineering knowledge of DCS, ESD, process Instrumentation, custody metering analyzer and functional safety in process plants.
• Experience with Intools/ Smart Plant Instrument is an advantage.

 

HSE Coordinator

(Jakarta)

Requirements

• Candidate must possess at least a Bachelors Degree, Engineering (Environmental/Health/Safety) or equivalent.
• Required language(s): English
• At least 10 year(s) of working experience in the related field is required for this position.
• Preferably Supervisor / Coordinators specializing in Engineering - Environmental/Health/Safety or equivalent.
• Full-Time position(s) available.
• Ideally from Subsea project background or offshore installation

 

QA Coordinator

(Jakarta)

Requirements

• Shall have an engineering degree
• Has 10 years experience as QA/HSE in oil and gas
• Has 5 -7 years experience conduct audit QA/HSE.
• Extensive knowledge of QA/HSE management system, rules and regulation with regard to HSE, OHSAS 18001 and ISO 14001, ISO 9001
• Extensive experience in documenting systems manual and procedures, safety
• Induction, auditing, incident investigation and monthly reporting of statistics and HSE analysis.
• Familiar with QA/HSE requirements of Oil & Gas industries as well as onshore fabrication and offshore platforms working procedures
• Certification Lead Auditor ISO9001:2008, OHSAS 18001:2007

 

For interested applicants, please submit your detailed resume and recent photograph by log on to:

 

www.technip.com

http://www.technip.com/en/careers/available-positions/locations

or via e-mail to

hrd.indo@technip.com

 

• Di iklankan: 2014-02-14 00:00:00 - Standar Waktu Asia Tenggara
• Berakhir: 2014-02-28 00:00:00 - Standar Waktu Asia Tenggara