Kamis, 14 November, 2013 | 688 dibaca | 0 dikomentari | 0 dibagi
Inspired Benchmark Sdn Bhd 1 of 2
We an established Engineering Management and Technical Service company with PETRONAS license in Malaysia for the Oil & Gas (Onshore/Offshore) project. We are looking for dedicated and motivated professionals to join us in Malaysia for the following positions;
1. LEAD/SENIOR PROCESS ENGINEER
- Minimum B.Sc. in Chemical Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience,
- At least 12 years in process detailed design for offshore and/or onshore oil & gas projects
- As Lead/Senior Process Engineer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Commissioning and Operation is highly valued.
- Minimum Technical knowledge on:
- Competency in HYSYS/Flarenet Simulation or equivalent process dynamic simulation software
- Relief and Blow-down Study
- Equipment Sizing and Calculation
- HAZOP, SIL, and RAM Study
- Material Selection and Corrosion Study
- Process Start-Up, Shutdown, Control and Operating Philosophy / Detailed Narratives
2. LEAD/SENIOR MECHANICAL ENGINEER
- Minimum B.Sc. in Mechanical Engineering or equivalent and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in mechanical engineering scope execution and management for offshore and/or onshore oil & gas projects
- As a Lead/Senior Mechanical Engineer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Fabrication, Commissioning and Operation is highly valued. Minimum Technical qualifications on:
- Mechanical Design on Equipment Internals and Assembly for Rotating and Static Equipment
- Thermal Design and Calculation
- Basic Pressure Vessel design calculation (PVelite)
- Material Handling Study
- Equipment Testing and Inspection Requirement
- Material Selection and Corrosion Study
- HVAC Design
3. LEAD/SENIORINSTRUMENT/CONTROL ENGINEER
- Minimum B.Sc. in Instrument Engineering or equivalentand registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in Instrument/Control detailed design for offshore and/or onshore oil & gas projects
- As a Lead/Senior Instrument Engineer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
- Minimum Technical qualifications on:
- Process and Control Philosophy
- State of the art Integrated control and safety system (ICSS) and its project execution
- Fire & Gas Mapping and Specifications
- Control, Safety Valves, RO and Cable Sizing
- In tools software
- Instrumentation Selection Study
- HAZOP, SIL, RAM, Alarm Management Study
- Knowledge of offshore facility telecommunications scope is a strong advantage
4. LEAD/SENIOR ELECTRICAL ENGINEER
- Minimum B.Sc. in Electrical Engineering or equivalent and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in electrical detailed design for offshore and/or onshore oil & gas projects
- As a Lead/Senior Electrical Engineer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
- Minimum Technical qualifications on:
- Electrical Equipment and Motor Sizing (ETAP software)
- Electrical state of the art Integrated Motor Control System (IMCS) Design
- Electrical Design Studies e.g. Load Flow, Transient Stability, Harmonic Level, Short Circuit, Load Sheddingand Black Start Studies
- Cable Sizing
- E-house Design
- Single Line, Wiring and Logic Diagrams
5. LEAD STRUCTURAL/ARCHITECTURAL ENGINEER
- Minimum B.Sc. in Civil/Structural Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in structural/architectural detailed design for offshore and/or onshore oil & gas projects
- As a Lead/Senior Structural/Architectural Engineer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
- Minimum Technical qualifications on:
- Competency in Structural Analysis Software e.g. STAAD Pro, SACS, MOSES or any other equivalent software
- Equipment Seating Design, Pipe design
- Structural Dynamic Vibration Analysis
- Effective weight control, COG management
6. LEAD/SENIOR NAVAL ARCHITECT
- Minimum B.Sc. in Structural or Mechanical Engineering and registered with BEM. A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in Naval Architecture detailed design scope for offshore oil & gas and floaters projects
- As a Lead/Senior Naval Architect for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in supporting fixed structure and/or floater loadout, inclination test, wet tow, floatover, upending operations etc. is highly valued.
- Competency in Dynamic Analysis Software e.g. MOSES, Ansys, GHS or any other equivalent software.
7. LEAD/SENIOR MARINE ENGINEER
- Minimum B.Sc. in Mechanical Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in Marine engineer detailed design scope for offshore oil & gas floater projects
- As a Lead/Senior Marine Engineer for at least 1 oil & gas floater EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in supporting Fabrication, Commissioning and Operation of floaters is highly valued.
- Competency in the following areas:-
- All floater marine systems – ballast, IG blanket systems
- Hard and soft mooring, hydraulic tension system
- Product evacuation system, pumps, hose balcony design
- Accommodation, utilities, engine room, thruster, communication system
- Marine monitoring system – acceleration, wave, current ADCP, weather system
- Stability monitoring system
8. LEAD/SENIOR PIPING ENGINEER
- Minimum B.Sc. in Mechanical Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in Piping engineering scope execution and management for offshore and/or onshore oil & gas projects
- As a Lead/Senior Piping Engineer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
- Minimum Technical qualifications on:
- Piping item, valves, special items
- Optimum material selection (pressure containing, soft parts, etc.)
- Valve Design
- Pipe Stress Analysis (CAESAR II)
- Pipe, Exhaust and Ducts Support Design
- Basic knowledge on Equipment Layout Design and 3D Modeling
9. LEAD/SENIORPROCESS SAFETY ENGINEER
- Minimum B.Sc. in Engineering and registered with BEM (or country equivalent). A professional engineer (PE) will be an advantage.
- Min. 15 years relevant working experience
- At least 12 years in process safety detailed engineering scope execution and management for offshore and/or onshore oil & gas projects
- As a Lead/Senior Process Safety Engineer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Health, Safety and Environment requirement for oil and gas processing facilities is highly valued.
- Minimum Technical qualifications on:
- Safety Critical Element Assessment
- Safety Case Studies – Design and Operations (Phast software)
- HAZOP, SIL and RAM Study
- Firewater System Design (Pipenet software)
- Flare, Radiation, Exhaust and Dispersion Study (Flaresim software)
- Escape, Evacuation and Rescue Assessment
- Noise and Vibration Assessment
- Risk Assessment
10. LEAD/SENIORPIPINGDESIGNER
- Minimum Diploma Mechanical Engineering or equivalent.
- Min. 15 years relevant working experience
- At least 12 years in Piping design scope execution and management for offshore and/or onshore oil & gas projects
- As a Lead/Senior Piping Designer for at least 1 CPP or FPSO EPCIC project.
- A thorough knowledge of relevant Malaysian, Class and international codes and standards including codes from all major clients e.g. PTS, DEP, ExxonMobil GPs, etc.
- Vast knowledge in Fabrication, Commissioning and Operation is highly valued.
- Minimum Technical qualifications on:
- 3D design – PDMS, PDS
- Pipe routing, GRP consideration
- Piping item, valves, special items
- Pipe, Exhaust, tray and ducts Support Design using MDS tool, cable length estimation tool, 2D GA cut.
- Optimum Equipment Layout Design, deck layout and planning.
- Constructability and operability/maintainability consideration in piping design.
- Effective interface with other discipline – Structural, E&I, Mechanical, to resolve all clashes and progress design.
Please note that for position (1) to (10), candidate with less experience (see below) may apply and be considered in a non-lead/non-senior engineer role.
- Min. 10 years relevant working experience
- At least 7 years in related discipline detailed engineering scope execution and management for offshore and/or onshore oil & gas projects
- As a related discipline engineer for at least 1 CPP or FPSO EPCIC project.
All positions shall be based in Kuala Lumpur, Malaysia. Attractive salary & Good Package Offered : Tax free, Accommodation & Transportation provided, Annual Return Ticket, Uniforms & Safety Gears, Overtime/Ex-gratis, Insurance coverage for personal accident, Surgical & Hospitalization.
Kindly submit the application to iinsbmark@yahoo.com with the following details;
- Latest update curriculum vitae
- Color copy of certificates qualifications
- Expected Salary (prefer in Ringgit Malaysia)
- Availability
- Skype ID
- Di iklankan: 2013-11-14 00:00:00 - Standar Waktu Asia Tenggara
- Berakhir: 2013-11-28 00:00:00 - Standar Waktu Asia Tenggara
BERLANGGANAN LOWONGAN KERJA